Tel:0769-8312-7032 

What is the difference between the feeder and the servo feeder?

Issuing time:2019-04-01 00:00

The new type of machine developed and produced on the basis of the traditional NC feeder, its unique back-and-forth yaw shifting feeding mode can minimize the scrap produced during stamping production, improve production efficiency and improve materials. Utilization rate, especially suitable for the production of wafers.

1. Feeding cost and feeding accuracy are different

2, the feeder feeding principle is different

3, the feeding operation mode is different

What kind of material is the yaw servo feeder mainly used for? The yaw feeder is generally used for material saving, such as punching, misalignment, left circle and circle, two segments, but the yoke feeder Minutes can't be rushed too many times, because it takes time for the machine to yaw to yaw and have a buffering process.

The servo yaw feeder is mainly for the metal wafer automatic shifting feeder. It is designed for the wafer cutting production line, saving cost and improving efficiency, high output, high efficiency, high precision, low energy consumption and fully automatic control. The leveling work rolls of the feeder can correct the curvature of the material so that the material can pass through the mold smoothly and ensure the flatness of the wafer.


Home   |   About us   |   Application  |   Solution   |   Products |   Contact us
         
Tel:+0086-769-83127032   Fax:+0086-769-83127082
E-mail: :Yuki@snk-pf.com.cn
Copyright:SNK PARTS FEEDER SYSTEM CO.,LTD